14710000

The easy and reliable operation software, furnished of advanced function, allows the MB100 BASIC - SY100 thermo-controller card (universal) to be installed on almost all the sold AIR and HYDRO pellet stoves. It also has advanced functions that are assigned to the technician who can put the operating parameters by the keyboard/display or by a computer with RS232 interface connection.

The display keyboard provides two menus and programming types:
- user menu to modify parameters of:
starting and switching off, operating power adjustment, operating temperature adjustment, manual pellet loading, pellet loading regulation, improvement of combustion ventilation, programming of the room temperature controller.

- technician menu to operate the adjusting advanced parameters of:
endless screw, ventilation, combustion, thermostats, timers, output enabling, operating check-up, starting, modulation, etc.

Equipped with remote control receptacle board, which regulates switching on/off and combustion power.

Set up for the following accessories:

cod. 14708002 - smoke probe
cod. 14708003 - room temperature probe
cod. 14710006 - connecting cable for key-board card
cod. 14710005 - CP110 keyboard
cod. 14710007 - TX4 remote control
cod. 14709010 - 2 contacts terminal block plug with 7.5 mm pitch
cod. 14709001 - 2 contacts terminal block plug with 5.08 mm pitch
cod. 14709002 - 3 contacts terminal block plug with 5.08 mm pitch
cod. 14709003 - 4 contacts terminal block plug with 5.08 mm pitch
cod. 14709005 - 6 contacts terminal block plug with 5.08 mm pitch
cod. 14709007 - 8 contacts terminal block plug with 5.08 mm pitch

For stoves 

- CLAM Aria Cod. 05011151 Mod. Sirio - Sirio+ - Astra - Astra+ - Venere - Venere+ - Vega - Vega+

- MORETTI DESIGN ref. PSYSQ01000108 ALL VENTILATED AIR STOVES AND AIR STOVES WITH 1 DUCTED OUTLET (No firmware)